AV-GAD AV-702 Especificaciones descargar pdf (Pagina 15)

Delete a User Code

1. Hold down key

Program

2. While four LEDs are blinking, enter code No. 1 (default 1234)

3. If code is valid, four LEDs will stop blinking, and ‘u’ will be displayed

4. The two left-most LEDs blink to indicate that the system is waiting for a new user

code-index (user 1 to 8) to be entered

5. Enter the code index you want to delete (1 for code No. 1; 2 for code No. 2, etc.)

6. The two right-most LEDs blink to indicate that the system is waiting for a new

code

7. Hold-down ‘9’ key to quit code setting

If user code is not entered, the code is voided. A short beep confirms

that the code has been deleted.

Setting the Follow-Me Telephone Number

The ‘Follow-Me’ feature is applicable only with the dialer; in alarm, Follow-Me

number is dialed first if the communicator (communicator dials to central station) is

not selected.

1. Hold down ‘6’ key twice; wait for the blinking of the three LEDs

2. Enter Telephone Number (maximum 16 digits and 4 pauses), and wait until all

LEDs stop blinking. The ‘Follow-Me’ number is now programmed

3. To delete ‘Follow-Me’ number, access ‘Follow-Me’ programming mode as

described in paragraph 1, but do not enter any number

Sounder

The Keypad sounder enhances the use of system operation and serves as a local alarm

device (requires programming).

Several programmable features set the sounder functionality. Ask your installer for

more details.

In AV-705, 706, 707 (LCD keypad) the user is able to switch the buzzer on and off at

each keypad. Holding down keys "0" and "#" simultaneously turn on and off the

internal buzzer.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

AV-GAD AV-702 Especificaciones Pagina 15